24 July 2004. SMS. DELQA and DELQA-PLUS (DELQA-YM) Switch Settings ======================================================================== The DELQA is a Q-bus Ethernet adapter. The usual cabinet kit provides a 10Base5 (AUI) connector. The DELQA replaces the obsolete DEQNA. The standard DELQA (M7516) and the DELQA-PLUS, also known as the DELQA-YM, "DELQA-T", and "DELQA Turbo" (M7516-YM), use the same hardware but different firmware. ======================================================================== The 5-position switch sets the mode and CSR address. Switch 1: CSR: closed: CSR = 17774440 (Default) open: CSR = 17774460 Switch 2: Reserved: closed (default) Switch 3: Mode: closed: Normal mode (Default) Switch 4: Option closed: MOP remote boot disabled (Default) open: MOP remote boot enabled Switch 3: Mode: open: DEQNA-lock (compatibility) mode Switch 4: Option closed: Sanity timer disabled open: Sanity timer enabled DELQA: Switch 5: Reserved: closed (Default) DELQA-YM: Switch 5: T-mode: closed: DELQA-T mode enabled (Default) open: DELQA-T mode disabled The "sanity timer" may also be called the "host inactivity timer". ======================================================================== In SYSGEN CONFIGURE for a DELQA, specify device "QNA".
DELQA Cabinet Kit (Cable)
Follow this link to more Q-bus material.